Welcome to SHENZHEN DEKE SEALING TECHNOLOGY CO.,LTD. website!

SHENZHEN DEKE SEALING TECHNOLOGY CO.,LTD.

Free consultation service hotline:

0755-89913396

Home  >  Solution  >  Groove design
Installation suggestions Compression ratio Groove design

Import chamfer

The correct groove design can eliminate possible damage and seal failure from the start. Since the O-ring is squeezed during installation, when designing the parts to be contacted during the introduction of the O-ring, there must be specified chamfering and rounding.


0b2384dec0ffeb3a9c377cf8f1753561.jpg


The minimum chamfer length Z, as a function related to the diameter of the O-ring section, is listed in the following table: Table 1-1 Import chamfer

fa96bcd5c41b13a78449f48cc778acdb.jpg